<

>

DTF PRO Printhead Cleaning and Flushing Solution - DTF, DTG Printhead Cleaner

Size		Price
100 ml		$7.74
950 ml		$19.00

DTF PRO Printhead Cleaning and Flushing Solution is specifically designed for flushing printheads and can be used to address minor clogs. If you have a damper/CIS based system, you can flush your printheads with this solution. Alternatively, if you have a cartridge-based system, you can fill the solution into cleaning cartridges and run up to three cleaning cycles with those cartridges. It is important to note that this solution should not be used for wet capping.

Available Options:

Size	Price	Unit Price
100 ml	$7.74	$0.08 per ml
950 ml	$19	$0.02 per ml

CAUTION: WORK IN A WELL VENTILATED AREA and wear PROTECTIVE GEAR (including masks and gloves) while handling specialty printing and curing materials and techniques (such as DTF, DTG, UV, WTT, etc.), due to the potential hazards from fumes and processes. It's strongly advised to use a fume extractor in addition to maintaining proper ventilation when using DTF powder.
Operating any specialty ink printing devices and materials, including inks, chemicals, powders, etc., is entirely at the user's risk.
To reduce the chances of ink clogs and film warping, it is strongly advised to maintain a room humidity 50%-70% and a temperature 75°-80°F / 24°-27°C.

solutions-all.pdf