Anti Static Duster

$9.45

$15

This anti-static duster is a useful tool for removing excess powder from your DTF film. Static electricity, humidity, and other environmental factors can negatively affect your DTF film such that it can adhere to more powder than is necessary. These factors, especially static, can even cause your powder to adhere to the film in areas where there is no printing / ink. Leaving the powder on the film before you heat it and press onto your garment can result in specs of powder that adhere to your shirt and show up as specs of white. The use of an anti-static duster to dust off the excess powder helps alleviate this issue. While you should still shake the powder off your film vigorously and as a first/required step, following up with a gentle anti-static duster will help remove that last remaining stubborn powder that clings to the film due to enviromental reasons (high humidity, too low humidity, static build up, or other factors).

CAUTION: WORK IN A WELL VENTILATED AREA and wear PROTECTIVE GEAR (including masks and gloves) while handling specialty printing and curing materials and techniques (such as DTF, DTG, UV, WTT, etc.), due to the potential hazards from fumes and processes. It's strongly advised to use a fume extractor in addition to maintaining proper ventilation when using DTF powder.
Operating any specialty ink printing devices and materials, including inks, chemicals, powders, etc., is entirely at the user's risk.
To reduce the chances of ink clogs and film warping, it is strongly advised to maintain a room humidity 55%-75% and a temperature 75°-80°F / 24°-27°C.

Click here to learn what is DTF and understand its advantages over other garment printing methods.

Customer Reviews

Share your thoughts

If you've bought this product from us, we'd love to hear your feedback and share it with other customers.