DTFLINE™ Industrial Heat Press Equipment

DTFLINE DBLDBL V2 Dual-Station Pneumatic Heat Press

Increase heat transfer production efficiency with the DTFLINE DBLDBL V2, a professional dual-station pneumatic heat press featuring two spacious 16" x 20" workstations. Its sliding upper heat platen lets you prepare one garment while pressing another, helping reduce downtime between transfers. With adjustable pneumatic pressure, digital temperature and timer controls, and automatic press-and-release operation, the DBLDBL V2 is built for efficient DTF, sublimation, and heat transfer production.

Dual-Station Productivity Prepare one garment while pressing another

Pneumatic Operation Automatic press-and-release with adjustable pressure

Large Pressing Area Two 16" x 20" (15.75" x 19.7") workstations

Digital Controls Adjustable temperature and pressing time

Available Products:
(swipe table to scroll)

DBLDBL V2 Heat Press	DBLDBL V3 Heat Press	DBLDBL V4 Heat Press	DBLDBL V6 Heat Press

16" x 20 2 working stations Sliding heat platen Semi-automatic pneumatic pressing Automatic press & release Digital temperature & timer Adjustable pressing pressure	16" x 20 2 working stations Sliding heat platen Manual & semi-automatic modes Temperature calibration & self-tuning Upper & lower platen pressure balancing Adjustable press & lift speed	16" x 20 4 rotating stations Automatic & manual modes Pneumatic pressing Digital temperature & timer Upper & lower platen pressure balancing Adjustable press & lift speed	16" x 20 6 rotating stations Dual heat presses Automatic & manual modes Digital temperature & timer Upper & lower platen pressure balancing Adjustable press & lift speed
$2,799.00	$2,969.99 view item	$9,974.99 view item	$13,774.99 view item

Designed for Efficient Production

Double the Workstations. Reduce Production Downtime.

Traditional single-station heat presses require operators to load, press and unload garments at the same workstation. The DBLDBL V2 introduces a more efficient alternating production workflow.

While one garment is being pressed, the operator can prepare the next garment at the second station. The upper heat platen slides between the two workstations, helping keep production moving with less idle time.

Ideal for print shops handling repeat orders, custom apparel, and production runs that benefit from consistent pressing cycles.

Two independent workstations
Alternate garment preparation and heat transfer application.
Sliding upper heat platen
Move the heated platen between the two pressing stations.
Reduced waiting time
Prepare the next transfer while the current cycle runs.
Production-friendly design
Well suited for repetitive garment transfer workflows.

More Efficient Garment Production

Press on One Side. Prepare on the Other.

Keep your heat transfer workflow moving with two large pressing stations and pneumatic press-and-release operation. The DBLDBL V2 helps reduce loading delays, operator effort and unnecessary downtime between garments.

Pneumatic Pressing Technology

Consistent Pressure with Automatic Press & Release

The DBLDBL V2 uses compressed air to power its pressing mechanism, reducing the physical effort associated with manually operated heat presses.

Adjustable pneumatic pressure and platen adjustment allow operators to configure pressing conditions for different transfer applications. The press automatically releases when the programmed timer cycle is complete.

Pneumatic pressure control
Compressed-air-powered pressing operation.
Automatic press and release
Pressing cycle completes according to the set timer.
Adjustable pressure
Configure pressure for your transfer application.
Emergency stop function
Additional operator control during machine operation.

Adjustable Digital Settings

Control Heat, Time & Pressure

The DBLDBL V2 features digital temperature and timer controls to help operators establish repeatable pressing conditions.

With a timer range of 0-999 seconds, adjustable pneumatic pressure and a large 15.75" x 19.7" pressing area, the system accommodates a variety of heat-applied transfer materials.

Digital temperature control
Adjustable temperature settings for supported transfer materials.
Digital timer
Pressing duration adjustable from 0-999 seconds.
Air pressure requirement
4-6 bar operating pressure, with a maximum of 8 bar.
Large-format platens
Each station measures 40 x 50 cm (15.75" x 19.7").

Versatile Heat Transfer Production

Professional Pressing for Multiple Transfer Methods

The DBLDBL V2 is designed for commercial garment decoration and other compatible heat-applied transfer applications.

DTF Transfers DTG HTV Sublimation Transfer Paper Heat-Applied Graphics Custom T-Shirts Workwear & Uniforms Promotional Apparel Production Printing

Simple Alternating Workflow

How the DBLDBL V2 Works

1. Prepare the First Station
Position your garment and transfer on one of the lower workstations.
2. Set Your Pressing Conditions
Adjust temperature, pressing time, and pneumatic pressure according to the transfer manufacturer's instructions.
3. Start the Pressing Cycle
Position the upper heat platen over the prepared workstation and activate the pressing cycle.
4. Prepare the Second Station
While the first transfer is pressing, load and align the next garment at the opposite workstation.
5. Alternate & Repeat
After automatic release, move the upper platen to the next prepared station and continue production.

Additional Equipment Required

External Air Compressor Required

The DBLDBL V2 operates using compressed air and requires an external air compressor for pneumatic pressing.

Important: An air compressor is required for operation and is sold separately. The machine requires an operating air pressure of 4-6 bar, with a maximum of 8 bar. Verify compressor capacity, air connections and electrical requirements before installation.

Technical Specifications

DTFLINE DBLDBL V2 Specifications

Model: DTFLINE DBLDBL V2
Machine Type: Semi-Automatic Pneumatic Heat Press
Station Configuration: Dual Station
Heat Platen Design: Sliding Upper Heat Platen
Pressing Area Per Station: 40 x 50 cm (15.75" x 19.7")
Pressing Operation: Pneumatic, automatic press, and release
Temperature Range: 0-399°C
Timer Range: 0-999 seconds
Pressure Control: Adjustable pneumatic pressure
Required Air Pressure: 4-6 bar (maximum 8 bar)
Air Compressor: Required, sold separately
Voltage Options: 110V or 220V, depending on configuration
Power Options: 2.2KW / 2.5KW / 3.0KW / 6.0KW, depending on platen size
Machine Weight: Approximately 75 kg (40 x 50 cm model)
Temperature Controller: Digital
Timer Controller: Digital
Safety Feature: Emergency Stop Function
Supported Applications: DTF, DTG, HTV, sublimation, transfer paper, and other heat-applied materials

Installation Note: Professional setup and testing are recommended before production. Machine color and external appearance may vary by production batch. Confirm the supplied electrical configuration before installation.

Manufacturer Warranty

Warranty & Safe Operation

The manufacturer warranty covers defects in materials and workmanship under normal intended use. Coverage excludes physical damage, misuse, improper installation, neglect, accidents, improper transport and unauthorized modifications or repairs. Removal or alteration of the product serial number may void warranty coverage.

Safety: Operate only with properly grounded electrical connections in a dry environment. Keep hands clear of moving platens and heated surfaces. Disconnect power before maintenance, follow all operating instructions and use suitable ventilation for heat transfer applications.

DTFLINE DBLDBL V2 Double Station, Sliding, Semi-Automatic Pneumatic Heat Press - 16 x 20 inch