DTF PRO Heat Station - V2 Replacement Filters

$0

LIMITED TIME 20% OFF

Filter		Price
Carbon		$23.99 $21.59
Dust		$21.99 $17.59

DTF PRO Heat Station v2 with Purifier Replacement Filters:

• Carbon Filter - identified as Filter 1 in the DTF PRO Heat Station v2 with Purifier, utilizes adsorption to eliminate impurities.
• Dust Filter - identified as Filter 2 in the DTF PRO Heat Station v2 with Purifier, operates by capturing airborne particles.

It is recommended to replace filters every 2 to 3 months for best results.

CAUTION: WORK IN A WELL VENTILATED AREA and wear PROTECTIVE GEAR (including masks and gloves) while handling specialty printing and curing materials and techniques (such as DTF, DTG, UV, WTT, etc.), due to the potential hazards from fumes and processes. It's strongly advised to use a fume extractor in addition to maintaining proper ventilation when using DTF powder.
Operating any specialty ink printing devices and materials, including inks, chemicals, powders, etc., is entirely at the user's risk.
To reduce the chances of ink clogs and film warping, it is strongly advised to maintain a room humidity 55%-75% and a temperature 75°-80°F / 24°-27°C.

Click here to learn what is DTF and understand its advantages over other garment printing methods.