DTF PRO Cleaning and Maintenance Pack

Cleaning solutions includes:

• 120ml / 4oz Cleaning solution
• 120ml / 4oz XTREME Cleaning solution

Maintenance solutions includes:

• 120ml / 4oz Capping solution
• 120ml / 4oz De-Plasticizing solution
• 120ml / 4oz Maintenance solution

Additional items:

• 50 x Professional printer cleaning foam swabs
• 5 x Syringes with syringe tips / tubes

How to use:

• CLEANING SOLUTION: This solution is specifically designed for flushing printheads and can be used to address minor clogs. If you have a damper/CIS based system, you can flush your printheads with this solution. Alternatively, if you have a cartridge-based system, you can fill the solution into cleaning cartridges and run up to three cleaning cycles with those cartridges. It is important to note that this solution should not be used for wet capping.
• XTREME CLEANING SOLUTION: This solution is intended for flushing ink tubing or unclogging stubborn printhead clogs. It is specifically designed to address extreme or stubborn clogs and can also be used to flush out inks from the ink tubing if you need to change them. If you have a damper/CIS based system, you can flush your printheads with this solution. Alternatively, if you have a cartridge-based system, you can fill the solution into cleaning cartridges and run up to three cleaning cycles with those cartridges. However, it is important to note that this solution should not be used for wet capping.
• CAPPING SOLUTION: This solution is specifically designed for wet capping of printheads and short-term maintenance. Its primary purpose is to saturate the printhead resting cap on the capping station at the end of the day. It is not meant to be used as a cleaning or unclogging solution, as these require the use of the Cleaning Solution or XTREME Cleaning Solution. If you require long-term maintenance, such as before going on vacation, it is recommended to use the Maintenance Solution instead.
• MAINTENANCE SOLUTION: This solution is intended for printhead maintenance during extended periods of inactivity, such as when your printer is in vacation mode. Its primary purpose is to keep your printheads lubricated and preserve them in their current condition. However, before using this solution, it is important to ensure that your printheads are working correctly, without any clogs or gaps on nozzle tests. Please note that this maintenance solution is not intended for cleaning or unclogging printheads, as this requires the use of the Cleaning Solution or XTREME Cleaning Solution.
• DE-PLASTICIZING SOLUTION: Use cleaning swabs to apply this solution to any ink that has solidified around your printhead, capping station, or on the wiper blade. It is important to avoid inserting this solution into the capping station or printhead channels.