32" NXT-GEN 32CE Automated Powder Application and Curing Machine (designed for Epson DTF, also works for Mimaki, Roland or STS DTF) - Compact Tunnel

This NXT-GEN POWDER APPLICATION MACHINE is a compact version designed as an in-line addition to your Epson DTF Printer. This machine has been specifically designed to work with the following DTF Printers.

• Epson DTF Printer
• Other DTF Printers with print speeds (up to 140sq ft per hour)

This NXT-GEN 32C DTF Powder Applicator and Dryer unit can cure DTF rolls up to 32 inches wide and is compatible with your Epson DTF Printer.

Available Options:

Features:

• Advanced Built-in HEPA 2 Layer Dual Air Filters: Filter out any fumes from DTF powder. Low maintenance, easy to replace filters.
• Advanced Film Detector: With the effective film sensor, it automatics turns off and on the power station, and heating elements which results in a lower power requirement.
• Low Power Consumption: 1300W / 8A / 220V
• Advanced powder ventilation within the powder station: Heating fans help reduce any powder build-up in the powdering station, less maintenance.
• Air vacuum conveyor system: There's an air vacuum on the front and end of the conveyor to keep the films from slipping/moving, it aligns the dtf films to get even heating throughout the heater/dryer.
• Advanced Take-Up System: Additional tension bar to roll up the finished dtf films better and compact as needed.
• LED Touch Screen: Easy to monitor and control.
• Pre-Heating: Ensures better ink and power adherence.
• Auto-Powder Recycling: No need to manually recirculate powder.
• Double Heating: Upper & Lower Heating ensures a better quality print+powder curing. Use of high efficiency lamps saves up to 5KW over competing shakers.

Weight and Dimensions (including packaging):

• 700 lbs
• 47" x 44" x 45"