IColor Glitter 2 Step - 'B' Adhesive Media for Light and Dark Textiles - 8.5 x 11 in - 100 sheets enlarged

IColor Glitter 2 Step - 'B' Adhesive Media for Light and Dark Textiles - 8.5 x 11 in - 100 sheets - WIDfKtfoUf4

IColor Glitter 2 Step - 'B' Adhesive Media for Light and Dark Textiles - 8.5 x 11 in - 100 sheets

$216
$171.00

IColor Glitter 2 Step -B- Adhesive Media for Light and Dark Textiles 8.5 in x 11 in (216 x 279mm) - Requires -A- Transfer Paper.

The IColor 2-Step Glitter Adhesive Media will allow you to transfer prints from the IColor series of printers onto a variety of light and dark garments and fabrics, with a glitter effect. Use IColor 2-Step Standard or Select Transfer Media with this product to add a glitter effect to your everyday transfers. Unlike foil stamping, the glitter is part of the white adhesive that is applied as a result of the 2-step process. It enhances the color of your print, and increases the adhesion to your garment for maximum durability, opacity and vibrancy on your finished product, as well as adds glitter to the entire image. Rasterization and breathability integrated into your design, as well as using the garment color as a mask, will enhance the stretch limit and softness of your finished product.

Only for use with IColor Printers using IColor Clear toner cartridges. Does not work with white toner systems!

MUST BE USED WITH EITHER THE SELECT OR STANDARD 2 STEP TRANSFER 'A' MEDIA!

THE USE OF A GLOSSY FINISHING SHEETS IS HIGHLY SUGGESTED TO GIVE THE TRANSFER A SHINY LOOK.

Sold in packs of 100

IMPORTANT: Requires the use of clear toner.

CAUTION: WORK IN A WELL VENTILATED AREA and wear PROTECTIVE GEAR (including masks and gloves) while handling specialty printing and curing materials and techniques (such as DTF, DTG, UV, WTT, etc.), due to the potential hazards from fumes and processes. It's strongly advised to use a fume extractor in addition to maintaining proper ventilation when using DTF powder.
Operating any specialty ink printing devices and materials, including inks, chemicals, powders, etc., is entirely at the user's risk.
To reduce the chances of ink clogs and film warping, it is strongly advised to maintain a room humidity 50%-70% and a temperature 75°-80°F / 24°-27°C.

Video:

Images: