DTFLINE™ Professional Heat Press Equipment

DTFLINE DBLDBL V3 Dual-Station Pneumatic Heat Press

Increase production speed and pressing consistency with the DTFLINE DBLDBL V3, a high-performance dual-station pneumatic heat press featuring two large 16" x 20" workstations. Prepare one garment while pressing another to minimize downtime and keep production moving. Upgraded V3 features include advanced temperature controls, pressure balancing, adjustable press, and lift speeds, and two-hand safety activation. Ideal for professional DTF, DTG, HTV, sublimation, and heat transfer production.

Dual-Station Productivity Prepare one garment while pressing another

Balanced Pressure Improved pressure distribution across both platens

Advanced V3 Controls Temperature calibration and self-tuning

16"x 20" Workstations Large 15.75" x 19.7" pressing area for professional transfers

Available Products:
(swipe table to scroll)

DBLDBL V2 Heat Press	DBLDBL V3 Heat Press	DBLDBL V4 Heat Press	DBLDBL V6 Heat Press

2 working stations Sliding heat platen Semi-automatic pneumatic pressing Automatic press & release Digital temperature & timer Adjustable pressing pressure	2 working stations Sliding heat platen Manual & semi-automatic modes Temperature calibration & self-tuning Upper & lower platen pressure balancing Adjustable press & lift speed	4 rotating stations Automatic & manual modes Pneumatic pressing Digital temperature & timer Upper & lower platen pressure balancing Adjustable press & lift speed	6 rotating stations Dual heat presses Automatic & manual modes Digital temperature & timer Upper & lower platen pressure balancing Adjustable press & lift speed
$2,799.00 view item	$2,969.99	$9,974.99 view item	$13,774.99 view item

High-Speed Dual-Station Production

Press on One Station. Prepare on the Other.

The DBLDBL V3 is built for busy print shops that need efficient, repeatable heat transfer production. Its dual-station design lets operators load and position the next garment while the current transfer is pressing.

The upper heating platen slides between the two workstations, helping reduce idle time between pressing cycles. This alternating workflow is ideal for larger orders, repeat production, and high-volume garment decoration.

Two large workstations
Each station supports 15.75" x 19.7" transfers.
Sliding upper heat platen
Alternate between workstations for continuous production.
Reduced loading delays
Prepare the next garment while the current cycle runs.
Industrial-grade construction
Built for professional garment printing environments.

Designed for Production Efficiency

Double the Workstations. Keep Production Moving.

Stop waiting between every heat transfer. With two spacious pressing stations, pneumatic operation and a sliding heating platen, the DBLDBL V3 helps streamline garment loading, pressing and unloading for faster, more consistent production.

New V3 Pressure Technology

Balanced Pressure for More Consistent Transfers

The DBLDBL V3 introduces a pressure balancing system on both the upper heat plate and lower platen. This upgraded design helps distribute pressing force more evenly across the transfer surface.

Combined with adjustable pneumatic pressure, the system supports more consistent contact between the transfer and garment, helping improve repeatability during production.

Dual pressure balancing
Pressure balancing on the upper and lower platens.
Improved pressure distribution
Helps maintain consistent contact across the transfer.
Adjustable pneumatic pressure
Configure pressure for different applications.
Consistent pressing cycles
Supports repeatable production with controlled settings.

Advanced V3 Temperature Control

Precision Heating with Calibration & Self-Tuning

The upgraded digital controller provides temperature calibration adjustment and a self-tuning function for improved heating control.

An optional session-based transfer counter helps track completed pressing cycles during production.

Temperature calibration
Adjust controller calibration for more accurate operation.
Self-tuning controller
Optimizes temperature control behavior.
Digital timer
Adjustable from 0-999 seconds.
Celsius / Fahrenheit
Select your preferred temperature display.
Session transfer counter
Optional tracking of pressing cycles.

Adjustable Pneumatic Operation

Control Pressing Speed, Pressure & Operation

The DBLDBL V3 supports both manual and semi-automatic operating modes, allowing operators to choose the workflow that best suits production.

Adjustable press and lift speeds provide additional control over pneumatic movement, while two-hand safety activation in manual mode helps reduce accidental operation.

Manual & semi-automatic modes
Flexible operation for different production workflows.
Adjustable press and lift speed
Fine-tune cylinder movement using the solenoid valve adjustment.
Two-hand safety activation
Manual mode requires two-hand activation.
Emergency stop button
Dedicated safety control for machine operation.
CE & RoHS
CE certified and RoHS compliant.

Professional Heat Transfer Applications

Versatile Pressing for Commercial Apparel Production

The DBLDBL V3 supports a wide range of heat-applied transfer applications for professional garment decorators.

DTF Transfers DTG HTV Sublimation Heat Transfer Paper Flock Transfers Flex Transfers Custom T-Shirts Workwear & Uniforms Production Apparel

Pneumatic Equipment Requirements

External Air Compressor Required

The DBLDBL V3 uses compressed air for pneumatic pressing and requires a suitable external air compressor, sold separately.

Minimum Compressor Power
800W (1 HP) recommended minimum.
Minimum Air Tank Capacity
30 liters (approximately 8 gallons).
Operating Air Pressure
0.4-0.6 MPa (60-90 PSI).
Maximum Supported Pressure
0.8 MPa (120 PSI).

Important: The external air compressor is not included and must be purchased separately. Confirm compressor specifications, air connections and electrical requirements before installation.

Technical Specifications

DTFLINE DBLDBL V3 Specifications

Model: DTF-PRO-DBLDBL-V3
Machine Type: Dual-Station Pneumatic Heat Press
Operating Modes: Manual and Semi-Automatic
Pressing Stations: 2
Heat Platen Size: 40 x 50 cm (15.75" x 19.7")
Upper Platen Design: Sliding
Temperature Range: Up to 260°C (500°F)
Timer Range: 0-999 seconds
Temperature Controller: Digital with calibration and self-tuning
Temperature Display: Celsius or Fahrenheit
Pressure Balancing: Upper heat plate and lower platen
Press & Lift Speed: Adjustable via solenoid valve restriction
Air Pressure: 0.4-0.6 MPa (60-90 PSI)
Maximum Air Pressure: 0.8 MPa (120 PSI)
Air Compressor: Required, sold separately
Minimum Recommended Compressor: 800W (1 HP), 30L (8-gallon) tank
Voltage Options: 110V or 220V
Power Consumption: 1800W (110V) / 2700W (220V)
Maximum Press Thickness: 40 mm
Machine Dimensions: 1080 x 730 x 590 mm (42" x 28" x 23")
Shipping Dimensions: 1230 x 770 x 650 mm (49" x 31" x 25")
Shipping Weight: 145 kg (320 lbs)
Safety Features: Two-hand manual activation and emergency stop
Certifications: CE certified, RoHS compliant
Supported Applications: DTF, DTG, HTV, sublimation, and other heat transfers

Installation: Professional setup and testing are recommended before production. Machine color and appearance may vary by production batch. Confirm voltage and compressor requirements before ordering.

Manufacturer Warranty

Warranty & Safe Operation

The manufacturer warranty covers defects in materials and workmanship under normal intended use. Coverage excludes physical damage, misuse, improper installation, neglect, accidents, improper transport, and unauthorized modifications or repairs. Removal or alteration of the serial number may void warranty coverage.

Safety Guidelines: Operate with properly grounded electrical connections in a dry environment. Keep hands clear of moving platens and heated surfaces. Disconnect power during maintenance and follow all operating instructions. Use appropriate ventilation and protective equipment for heat transfer applications.

DTFLINE DBLDBL V3 Double Station, Sliding, Semi-Automatic Pneumatic Heat Press - 16 x 20 inch