IColor Presto! 1 Step - Silver Metallic Hard Surface Transfer Media - 8.5 x 11 in - 100 sheets enlarged

IColor Presto! 1 Step - Silver Metallic Hard Surface Transfer Media - 8.5 x 11 in - 100 sheets - skd4YiGOgUg

IColor Presto! 1 Step - Silver Metallic Hard Surface Transfer Media - 8.5 x 11 in - 100 sheets

$191
$151.05

IColor Presto! 1 Step Silver Metallic Hard Surface Transfer Media 8.5 in x 11 in (216 x 279mm).

IColor Presto! 1 Step Metallic Hard Surface Transfer Media is an easy to use, all-in-one paper for use with a variety of monochrome, white toner, CMYK Laser/LED printers and copiers. Print in black and press in bronze, gold and silver onto ceramic, glass, and metal. No cutting or weeding necessary! IColor Presto! 1 Step Metallic Hard Surface Transfer Media does not require coated substrates, although certain coatings like CLC coated mugs will add to the durability of your project.

Works best with vector graphics and fonts. Add distress to the image for a vintage look. High density prints are recommended for best results.

Please follow the steps below for best results. Each substrate will have a slightly different technique. Refer to the applicable section as it pertains to your project.

Sold in packs of 100.

IMPORTANT: No adhesive is needed, this paper already has it.

CAUTION: WORK IN A WELL VENTILATED AREA and wear PROTECTIVE GEAR (including masks and gloves) while handling specialty printing and curing materials and techniques (such as DTF, DTG, UV, WTT, etc.), due to the potential hazards from fumes and processes. It's strongly advised to use a fume extractor in addition to maintaining proper ventilation when using DTF powder.
Operating any specialty ink printing devices and materials, including inks, chemicals, powders, etc., is entirely at the user's risk.
To reduce the chances of ink clogs and film warping, it is strongly advised to maintain a room humidity 50%-70% and a temperature 75°-80°F / 24°-27°C.

Video:

Images: