DTF PRO Capping Solution Concentrate - DTF, DTG Printhead Capping

$90
$42.00

Out of Stock

950ml Printhead Wet Capping Solution Concentrate - mix in ratio 1:4 with distilled water to yield 1 gallon.

DTF PRO Printhead Wet Capping Solution is designed to be used only for saturating the printhead resting cap on the capping station at the end of each business day and is not meant to be used as a cleaning solution for the printhead.

For resolving clogs or performing deep cleaning, the Cleaning solution or XTREME Cleaning solution should be used instead. For long-term maintenance, such as during vacations, the Maintenance solution is recommended.

---

CAUTION: WORK IN A WELL VENTILATED AREA and wear PROTECTIVE GEAR (including masks and gloves) while handling specialty printing and curing materials and techniques (such as DTF, DTG, UV, WTT, etc.), due to the potential hazards from fumes and processes. It's strongly advised to use a fume extractor in addition to maintaining proper ventilation when using DTF powder.
Operating any specialty ink printing devices and materials, including inks, chemicals, powders, etc., is entirely at the user's risk.
To reduce the chances of ink clogs and film warping, maintain the environment for specialty inks and films within optimal humidity (50% - 70%) and temperature (75° to 80°F) conditions. To reduce the likelihood of ink clogs and prevent film buckling, it is strongly advised to maintain a room humidity 50%-70% and a temperature 75°-80°F / 24°-27°C.

---

Video:

---

Images:

---

Files: